 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
Ther-Monic
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
INDUCTION POWER SUPPLY
|
|
|
|
|
|
 |
|
|
|
|
|
Thyristor-Based Solid State
AC-DC-AC Converters
|
|
|
|
|
|
The SST Series Induction Power Supply
|
|
|
|
|
|
S o l i d S t a t e , T h y r i s t o r
|
|
|
|
|
|
- All Solid State Design: Small size and weight, Microprocessor controlled.
- Coil matching network includes isolation transformer and series capacitor bank for efficient power transfer.
- Easy set-up, Low maintenance, No warm-up with instant on.
- Push-button controlled for easy operator interface, repeat accuracy of +/- 0.5% of setting.
- Operator push-button for on/off and potentiometer for converter power control.
- Diagnostic indicating lights for either fault or warning conditions:
|
|
|
|
- Over-current protection
- Over-voltage protection
- Unique load sensor current
- Electronic water flow switch
- Power Supply internal temperature protection
|
- RF/EMI input filter
- Transient over-voltage and surge current protection
- Electrically isolated low voltage output transformer
- Fast fuse on output circuit
- Fast input circuit breaker
|
|
|
|
|
|
|
- Tracks temperature by means of a 4-20 mA control input.
- Universal input jack provides direct interface with PLC.
- Optional Accessories: Water-to-air Heat Exchangers, Foot Pedal, and Process Automation Machinery.
|
|
|
|
|
|
Power Supply Specifications
|
|
|
|
|
|
|
Medium Frequency (25-50 KHz) Power Supplies
|
|
|
|
|
|
|
Power
|
Required
|
Incoming
|
Diminsions (inches)
|
Weight
|
|
|
|
|
|
Model
|
(watts)
|
Cooling
|
Line
|
Width
|
Depth
|
Height
|
(pounds)
|
|
|
|
|
SST 1.5B
|
15002
|
Water3
0.25 GPM
|
115 V 6,7
|
12
|
10.5
|
6.38
|
20
|
|
SST 2.5R
|
25002
|
Water3
0.4 GPM
|
230 V 6,9
|
13.5
|
7.25
|
14.5
|
32
|
|
SST 5.0R
|
50002
|
Water3
0.7 GPM
|
230 V 6,11
|
15.5
|
8.25
|
17.5
|
55
|
|
|
|
|
|
Notes:
- Specifications are subject to change without notice. Our policy is continuous improvement
- Power output dependent on load quality. Full power delivered to a majority of loads.
- Recommended pressure differentional 40 psi (30 psi minimum, 100 psi maximum)
- Maximum inlet temperature 40 degrees centigrade (104 degrees Fahrenheit).
- Resistivity 2200 ohm/cm maximum (mineral free)
- Other voltages available on special order basis.
- 115v +/- 10% 50/60 Hz, 1 phase, 12.5 amperes, 0.6 P.F., 2.5 KVA.
- 230v +/- 10% 50/60 Hz, 1 phase, 11.0 amperes, 0.6 P.F., 4.1 KVA.
- 230v +/- 10% 50/60 Hz, 1 phase, 22.0 amperes, 0.6 P.F., 8.3 KVA. 230V, 3 phase also available
|
|
|
|
