Information - Email us at sales@taylor-winfield.com
 

 Single Wing Heavy Series:
machines are the most versatile of all tangent benders. They handle a wide variety of products in relatively simple, inexpensive tooling and can form curved surfaces between corners as well as perform radius bends. They are most often used where many different products are produced in moderate quantities, rather than where high volume processing is required. This popular type is available in nine standard sizes handling width to 120-in. and radi up to 24-in. Most models are equipped with 5, 10 or 15 horsepower motor. However, several models may be equipped with larger drives increase operating speed or to furnish added power for bending plates and heavy structural shapes. Although Single Wing Tangent benders form only one corner at a time, many narrow sheet metal jobs and most tubes and structural shapes can be formed in multiple station dies so that several bends are made each time the machine operates. Standard heavy series are supplied with solid type wing construction, rather than spring supported roller action slip plate. The solid type wing is more suitable for using adjustable type eccentric pin slip plate controls as it tends to reduce the shearing forces on the eccentric pins from weight of slip plate and rocker die assembly when bender wing is in the up position.