Information - Email us at sales@taylor-winfield.com
 


Specifications for EB-00 Spot/Projection Welders

MECHANICAL SPECIFICATIONS

Weld Force Range

1-8 Lb. (2.2-17.6 kg.) light Spring
1-20 Lb. (4.4-44 kg) heavy Spring
7.3 Lb. (3.3kg) manimum pedal force required

Throat Depth

Adjustable 2.375-3.125 (60-80mm)

Horn Spacing

0.5-1” (12-25mm)
+0.5 (12mm)by inverting lower horn

Electrode Opening

.625 (16mm) maximum

Horn Diameter

.375” (9.6mm) diameter

Electrode Size

.125” dia. x 2.5” (3.2mm x 64mm) standard

Weld Head Size

9.75” H x 4” W x 7.6 long (247x101x193mm)

Weight (Head Only)

10 Lb. (4.5 kg)

Normal Transformer Rating

2.5 KVA 50% Duty Cycle

ELECTRICAL SPECIFICATIONS

Machine Type

 

EB-00

Transformer Type

 

L1-.075-3-12-T1

KVA Rating

 

.75

Secondary Cables

 

E-147272

Secondary Volts

Max.
Min.

3.03
1.68

Secondary Amps., S.C.*

Max. +/- 10%
Min. +/- 10%

2500
1390

KVA Demand, S.C. **

Max. +/- 20%

7.5

Duty Cycle, S.C.

Max. %

.5

Primary Amps. Max.

230 Volts
460 Volts

32
16

Fusible Line Switch Rating

230 Volts

10

Cable Size, 50% Drop, for Cable Run 100 Ft. Max., Cable to contact

230 Volt
460 Volt

#12
#14

Recommended Welding Control

 

NS-1H-H-G25

* At 2" Horn Spacing
** Cables are part of transformer secondary

Taylor-Winfield recommends the above isolation switch, fuse and cable sizes, but customer should check local, city and state electrical code requirements.

The switch size, fuse size and feeder cable size are selected for short circuit capacity of equipment; that is, with electrodes shorted. When using this type of welder, the actual welding current may be considerably less than the indicated short circuit value since the welding job will normally have considerable resistance

HOME

BACK