|
Force System Options
• Gravity ram drop with electrical interlock
• Airline filter with bowl trap and automatic drain.
• 4-1/2" air gauge calibrated in pounds weld force
• Adjustable stroke cylinder, 3" (specify size 4", 5" or 6" dia). Adjustable-retractable stroke cylinder, 3" foot switch and
solenoid valve controlled (specify 4", 5" or 6" dia).
• Precision air regulator.
• Seal-off airlock, single pressure (includes precision air regulator and air tank).
• Four inch ram stroke available on all cylinders.
• Air operated lower ram.
• Anti-impact mechanism with solenoid valve and electronic time delay relay.
Electrode and Horn Options
• Standard (90
degree) upper and lower square horns, electrode holders, and electrodes to convert Style 1 to Style 1-A.
• Standard (90 degree) upper and lower round horns, electrode holders, and electrodes to convert Style 1
modified to Style 1-A modified.
• Universal (90 degree - 22-1/2 degree) upper and lower square horns, electrode holders and electrodes to convert Style 1 to Style 1-A.
• Universal (90 degree - 22-1/2 degree)
upper and lower round horns for Style 5 welder in place of standard.
• Lower horn brace (Standard on Style 5 welders of 24" spot throat depth and larger).
Transformer Options
• Series-Parallel tap switch (Low-high ranges).
• Re-connectable dual voltage (230/460) welding transformer
• Welding transformer for 50 Hz operation
• Special transformer for full output at 208 v, or 380 v.
• Special kva (or Group 2) transformer
Cooling System Options
• Water system with inlet and outlet manifolds, flow adjusting valves, with or
without flow indicators.
• Quick change hose couplings in hoses to both electrode holders.
• Water saver valve, solenoid operated by heat on/off switch.
• Automatic solenoid operated water shut-off valve.
• Water system with inlet manifold, open drain water tunnel and flow adjusting valves.
Tooling Options
• Mechanical safety ram latch with non-repeat, non-tie downpalm buttons.
• Manual tool slide with limit switch, Style 1 only (dual palm buttons required).
• Tilt-out knee, Style 1 only (dual palm buttons required).
Initiation and Control Options
• Two stage foot switch
• Dual non-repeat, non-tie down palm buttons - one stage with or without foot switch
and keyed selector switch.
• Heat on/off switch.
• Mounting of welder control, inter-connection and system test.
Convenience Options
• Hydraulic jack in place of standard screw jack.
• Special paint (Specify brand, type and color).
• Additional instruction manuals.
• Export boxing.
Accessories and Controls
• We assume full responsibility for the complete coordinated equipment package.
• A wide selection of various accessories is applicable to ENE welders including the latest safety features to meet OSHA
requirements.
• Sales and Service Representatives in principal cities.
|
