|
Force System Options
• Gravity ram drop with electrical interlock
• Airline filter with bowl trap and automatic drain.
• 4-1/2" air gauge calibrated in pounds weld force.
• Precision air pressure regulator.
• Adjustable stroke cylinder, 4" maximum stroke (specify size 6", 7" or 8").
Adjustable-retractable stroke cylinder, 4" maximum stroke, foot switch and solenoid valve controlled (specify size 6", 7" or 8").
• Seal-off airlock, single pressure (includes precision air regulator and air tank).
• Seal-off airlock, double pressure fixed ratio (includes precision air regulator and air tank).
• Variable ratio double pressure airlock, in place of fixed ratio.
• Lockout mechanism for single or double pressure airlocks.
Electrodes and Horn Options
• Standard (90 degree) upper and lower
square horns, electrode holders, and electrodes to convert Style 1 to Style 1-A.
• Standard (90 degree) upper and lower round horns, electrode holders, and electrodes to convert Style 1 modified to Style 1-A
modified.
• Universal (90 degree - 22-1/2 degree) upper and lower square horns, electrode holders and electrodes to convert Style 1 to Style 1-A.
• Universal (90 degree - 22-1/2 degree) upper and lower round
horns for Style 5 welder in place of standard.
• Lower horn brace (Standard on Style 5 welders of 36" spot throat depth and larger).
Transformer Options
• Series-Parallel tap switch (Low-high ranges).
• Re connectable dual voltage (230/460) welding transformer
• Welding transformer for 50 Hz operation
• Special transformer for full 220v output at 208 v.
• Special kva (or Group 2) transformer
Cooling System Options
• Water system with inlet and outlet manifolds, flow adjusting valves, with or without flow indicators.
• Quick change hose couplings in hoses to both electrode holders.
• Water saver valve, solenoid operated by heat on/off switch.
• Water system with inlet manifold, open drain water tunnel and flow adjusting valves.
Tooling Options
• Mechanical safety ram latch with non-repeat, non-tie down palm buttons (For use with standard
cylinder only).
• Manual tool slide with limit switch, Style 1 only (dual palm buttons required).
• Tilt-out knee, Style 1 only (dual palm buttons required).
Initiation and Control Options
• Two stage foot switch
• Dual non-repeat, non-tie down palm buttons - one stage with or without foot switch and keyed selector switch.
• Additional foot switch, for use with dual weld schedule.
• Heat on/off switch.
• Mounting of welder control, inter-connection and system test.
• T-W solid state controls.
Convenience Options
• Special paint (Specify brand, type and color).
• Additional instruction manuals.
• Export boxing.
Accessories and Controls
• Taylor-Winfield has the unique capability of building its own high quality solid state microprocessor welding controls.
• To avoid installation and maintenance problems, controls and accessories are designed specifically for T-W welders.
• We assume full responsibility for the complete coordinated equipment package.
• A
wide selection of various accessories are applicable to ERE welders including the latest safety features to meet OSHA requirements.
• Sales and Service Representatives in principal cities.
|
