Information - Email us at sales@taylor-winfield.com
 

WELDPROBE FORCE CALIBRATOR

FORCE RANGES TO 10,000 LBS.

RUGGED, EASY TO USE

NIST TRACEABLE ACCURACY 0.5%

RELIABLE, REPEATABLE RESULTS

WELD THROUGH IT

ENGLISH OR METRIC

The WeldProbe is a rugged, hand-held instrument for accurately calibrating weld electrode force on table-top and micro joining resistance welding heads. This device helps ensure compliance with ISO9000 or QS9000 quality requirements by taking the guesswork out of setup. Measuring accurate force levels at the electrode tips helps eliminate inaccuracies of line-pressure readings, springs, lever arms and mechanical friction and wear.

The WeldProbe is designed for long life in the harsh welding environment by using standard fully-welded load cell construction and NEMA 4 electronic packaging. The easy to use design includes a simple push-button format and a large LCD display that provides both continuous and peak (max) force values in keypad selectable engineering units.

High-speed digital electronics sample force readings during the squeeze-weld-hold sequence and capture the peak force for display. A simple, one-button CLEAR prepares the instrument for the next reading. Two standard 9 volt alkaline batteries provide 80 hours of continuous use. Battery life is maximized with a programmable power-off feature.

SPECIFICATIONS

Performance

Capacities

0-500, 2000, 5000, 10,000 (or equivalent metric)

Overload

150%

Accuracy

0.5%

Output

4 digit LCD display

Sampling Rate

19.2 kHz internal; 24Hz display update

Battery Life
(continuous)

80 hours with two 9 volt alkaline batteries
(includes programmable auto-off feature)

Display

Selectable engineering units (Lbs., Kg., N)

Environmental

Package

All welded load cell, NEMA 4 electronics

Operating Temperature

30o F. to 140o F.

Weld Current

Survives accidental current discharge

Approvals

CE rated for EMC environments

HOW TO ORDER

Model WP9000
         One-Handed:    AW521
         Two-Handed:    AW511

Capacity:
           500 lbs (200Kg)       CR
         2000 lbs (900 Kg)       DL
         5000lbs (2000Kg)      DR
         7500lbs (3400Kg)      DT
       10000lbs (4500Kg)       DV

Head Configuration:
         Indents                        Standard
         Projection Button      72a

OPERATING SEQUENCE

1. Depress ON/OFF button to power up unit.
2. Press and hold ZERO button of zero display.
3. Insert probe and take force reading.
4. Toggle MIN/MAX button to read MAX (peak) force value.
5. Press CLEAR to reset the MAX value in preparation for             next reading

BACK